Melody Everest 212

Beschrijving

Melody Everest 212

Het paradepaardje van Melody Hifi Australia, de Everest 212!

Met een verbluffende 75 Kg. per stuk voor een adembenemende verschijning en een nog nooit gehoorde, excellente weergave van je favoriete muziek, om kippenvel van te krijgen. Nee, het wordt niet beter, de Everest 212 is van topklasse.

Melody Everest 212

Het best in combinatie zijn met de Melody Everest 8688 voorversterker.

About Melody Hifi Australia

The Melody International Holdings Pty Ltd. was established in 1999 in Australia , and make a factory in shenzhen of CHINA,The company mainly designs & manufactures classic vacuum tube amplifiers, CD Players, picture tube regenerator instruments & other high-end products,Melody has designed & manufactured a variety of products to US, Europe, Japan, Korea, Taiwan, Singapore & many other neighboring regions & countries. Over the years, the company’s products have won many national awards & praises from a few magazines. 2002 MELODY bile machine has passed the European safety standards & CE certification, 2006 European environmental certification. From 2002 onwards, Melody bile machine in Hong Kong “fever audio” magazine (The High End Audio Journal of Hong Kong) was named the best equipment of the year for 5 consecutive years. In the French magazine “Revue du Son du Home Cinema”, Melody’s pre-amplifier 1688, integrated amplifier SP3 & [1]PM845 was rated a 5 star. Melody has repeatedly demonstrated the company’s products at world-renowned exhibitions & has been consistently loved by consumers around the world.

Melody’s development goal: Built a world-class classic audio products

Technische Specifications

Power output	1x 30 Watt Class A
No. of chanels	1
Speaker Tpas	4 & 8 Ohm
Input impedance	100 KΩ
Input sensitivity	1.2v
FREQUENCY RESPONSE	+/-0.5dB from 20Hz to 30,000Hz
TOTAL HARMONIC DISTORTION	1%
SIGNAL TO NOISE RATIO	>86dB
VACUUM TUBES (8)	1 x Melody 212 1 x WE 373A 2 x WE429
DIMENSIONS ( W X H X D)	34cm x 41.5cm x 880cm
WEIGHTGUARANTEE GUARANTEE TUBES	Net 75 kg a piece1000 day’s 6 months

Technische Informatie

Amplifier Topology:
Triode Vacuum Tube Output Stage, Switchable Topology Single-Ended or Push-Pull

Vacuum Tubes:
2 x 12AX7 (ECC83), 4 x 6AQ5A (EL90)

Inputs:
2 x RCA (Input 1 & Preamp Output = Pass-Thru when amplifier is in Standby or Off)

Input Impedance:
50 kOhms (Pass-Thru= 300 kOhms)

Maximum Input Level:
7.7 VAC RMS (+20 dBu)
(Conditions: XLR output, PP mode, 16 ohm load, VOLUME max, EQ out, 1kHz sine wave)

Gain:
Load 16 ohm: 12 dB (Min FB), 3 dB (Max FB)
Load 62 ohm: 17 dB (Min FB), 8 dB (Max FB)
Load 200 ohm: 22 dB (Min FB), 13 dB (Max FB)
(Conditions: XLR output, PP mode, VOLUME Max, EQ out, 1kHz sine wave)

Input Sensitivity:
600 mV AC RMS for an output of 100 mW
1.9 VAC RMS for an output of 1W
(Conditions: XLR output, PP mode, FB 12:00 o’clock, 16 ohm load, 1kHz sine wave, VOLUME max, EQ out)

Volume Control:
– Precision Stepped Relay Attenuator 0.5dB per step
– 63dB total attenuation – Volume setting to minimum = MUTE

Outputs (transformer coupled):
1 pair RCA- Unbalanced (Preamp Output)
1 x TRS ¼” JACK – Unbalanced
1 x 4 PIN XLR- Balanced

XLR-pin outs – (Left Channel Pin 1= Signal (+), Pin 2= Signal (-), Right Channel Pin 3= Signal (+), Pin 4= Signal (-))

Output Impedance:
Switchable: Low 12-50 Ohm, Mid 50-200 Ohm, High 200-600 Ohms

Maximum Output Power = 1W into 12 Ohms BW 22Hz-22kHz

Variable Feedback Control (FB):
MIN 0dB
MAX 10dB
(Conditions: BAL output, PP mode, 16 ohm load, VOLUME max, EQ out)

Signal to Noise Ratio:
83 dB (1kHz sine wave, 100mW output, BW 22Hz-22kHz)
(Conditions: BAL output, PP mode, FB 12:00 o’clock, 16 ohm load, VOLUME max, EQ out)

Noise Floor:
-80 dBu BW 22Hz-22kHz
-85 dBu A-Weighted
(Conditions: BAL output, PP mode, FB 12:00 o’clock, 16 ohm load, VOLUME MAX, EQ out)

Channel Crosstalk:
-71 dB (1kHz sine wave, 100mW output, BW 22Hz-22kHz) Left Channel
-72 dB (1kHz sine wave, 100mW output, BW 22Hz-22kHz) Right Channel
(Conditions: BAL output, PP mode, FB 12:00 o’clock, 16 ohm load, EQ out)

Balance Control Channel attenuation:
Left Channel= 72dB (1kHz sine wave, 100mW output, BW 22Hz-22kHz)
Right Channel= 72dB (1kHz tone, 100mW output, BW 22Hz-22kHz)
(Conditions: BAL output, PP mode, FB Min, 16 ohm load, EQ out)

Frequency Response:
Push-Pull= Flat 10Hz – 20 kHz (-1dB @ 40 kHz)
Single-Ended= 20Hz – 20 kHz (-0.5dB @ 10Hz, -1dB @ 50 kHz)
(Conditions: BAL output, 100mW output, FB @ 12:00 o’clock, 16 ohm load, EQ out)

Distortion:
Push-Pull= 0.16% THD+N (BW 20Hz-22kHz)
Single-Ended= 1.0% THD+N (BW 20Hz-22kHz)
(Conditions: BAL output, PP mode, 1 kHz sine, 100mW output, FB @ 12:00 o’clock, 16 ohm load, EQ out)

Supplied with Remora RF remote control
Soft Start, 30 second mute-controlled power-up sequence
Operating Mains Voltage: 90-250 VAC, 50-60Hz, universal works worldwide
Unit Dimensions: 11.5 x 5.5 x 8.2” (LxWxH)
Unit Weight: 12 lbs
Shipping Weight = 13.5 lbs
Packing Carton Dimensions: 17 x 11 x 15”
Power consumption STANDBY mode = 0.5W, Max Power = 80W
Heat Rise above ambient temperature at rear panel: 25ºC or 44ºF
Heat Rise above ambient temperature at side panels: 15ºC or 26ºF

Locatie	Televisieweg 60 1322AM, Almere Nederland
Email	info@atube-hifiimport.nl
Telefoonnummer	06-30399520
	036-3333330

Melody Everest 212

Beschrijving

Melody Everest 212

Melody Everest 212

About Melody Hifi Australia

Technische Specifications

Technische Informatie

Melody Action Evo

Melody WE-2688

Melody AN300B MAX

Melody Everest 8688

Contactformulier

Contact informatie

Locatie

Melody Everest 212

Beschrijving

Melody Everest 212

Melody Everest 212

About Melody Hifi Australia

Technische Specifications

Technische Informatie

Gerelateerde producten

Melody Action Evo

Melody WE-2688

Melody AN300B MAX

Melody Everest 8688

Contactformulier

Contact informatie

Locatie